Quick request
Yes, I have read the Privacy Notice and agree  to allow MASCHINENFABRIK RUDOLF SCHÖBERL Gesellschaft m.b.H. & Co. KG. to store and process my data.
 

Lamellation Presses

SOLID. STRONG. RELIABLE.

Our lamellation presses have proved themselves in practice for years through their solid construction. The robust base frame is designed for one- or two-sided feeding.

The amount of cylinders and necessary press capacity depends on the type of wood as well as the required clamping length and depth. Each hydraulic chuck can be adjusted individually through manual control, therefore work pieces of all different sizes can be processed. Size can be quickly adjusted through precise runners and ball bearing carriages. All models include a counter weight for an easy height adjustment of the hydraulic chucks. Contact pressure from the front is achieved through slidable holding down devices with pneumatic cylinders.

Available upon request with height adjustable working piece support.

 

Available Sizes:

Clamping length:
up to 24.000 mm
Clamping height:
up to 2.500 mm
Workpiece support width:
up to 400 mm
Press capacity:
up to 25.000 daN / cylinder

Contact

MASCHINENFABRIK RUDOLF SCHÖBERL Gesellschaft m. b. H. & Co. KG.
A-4320 Perg | Naarner Straße 42
Phone: +43 7262 523 35
Fax: +43 7262 530 35

VARIATIONS:

Lamellation Press, workpiece support width 300 mm
  • workpiece support width 300 mm
  • clamping length 10.000 mm
  • fixed clamping height 1.100 mm
  • 20 intermediate beams with cylinder ø100 mm - press capacity 12.500 daN at 160 bar
  • pivoting side pressure plates
Lamellation Press, workpiece support width 400 mm
  • workpiece support width 400 mm
  • clamping length 5.400 mm
  • clamping height 1.100 mm
  • 14 intermediate beams with cylinder ø100 mm - press capacity 12.500 daN at 160 bar
  • adjustable height of cylinders
  • 3 holding down devices for contact pressure from the front
Lamellation Press, workpiece support width 300 mm
  • workpiece support width 300 mm
  • clamping length 3.000 mm
  • clamping height 1.100 mm
  • 6 intermediate beams with cylinder ø120 mm - press capacity 18.000 daN at 160 bar
  • adjustable height of cylinders
  • 2 holding down devices for contact pressure from the front
Lamellation Press, workpiece support width 250 mm
  • workpiece support width 250 mm
  • clamping length 5.000 mm
  • fixed clamping height 400 mm
  • 16 intermediate beams with cylinder ø100 mm - press capacity 12.500 daN at 160 bar
  • 4 holding down devices for contact pressure from the front
  • Rolls with pneumatc cylinders to lift and slide the finished workpieces
Lamellation Press, workpiece support width 160 mm
  • workpiece support width 150 mm
  • clamping length 6.000 mm
  • clamping height 1.500 mm
  • 12 intermediate beams with cylinder ø80 mm - press capacity 8.000 daN at 160 bar
  • adjustable height of cylinders and workpiece support
  • 6 holding down devices for contact pressure from the front

 

Lamellation Press, workpiece support width 160 mm
  • workpiece support width 220 mm
  • clamping length 8.000 mm
  • clamping height 1.500 mm
  • 20 intermediate beams with cylinder ø80 mm - press capacity 8.000 daN at 160 bar
  • adjustable height of cylinders and workpiece support